Switch Language:

ODME - Oil Discharge Monitoring Equipment

ODME Main Units

Calculator

The ODME Calculator or the ODME Operator Console or the ODME Controller is the main ODME unit, which receives all the data signals from the ships peripheral Devices such as Ships Speed Log, Ships GPS, Flow meter etc. The unit then, after having collected all the data from the peripheral devices and after the operator has entered all the ships particulars, performs all the required calculations as per IMO / MARPOL regulations and controls the Overboard and Slop Valve, making sure that the Hydrocarbons discharged at sea are within the Limit of 30L/NM and also within the total oil limit of 1/3000 of the ships total cargo.

Motor Starter

The Motor starter is the device for manual or automatic start - stop of the motor driving the sampling pump of the ODME system, as well as for the protection of it in case of malfunction.

Measuring Vessel on its Tape or PPM Measurer

This is a Major ODME device installed back-to-back with the Oil Content Meter Unit either in the Engine Room or in the ships Open Deck. It is the device where the water is passing through it for Optical Analysis.

Oil Content Meter

The OLEOMETRE or the Oil Content Meter is the Water Analyzing unit for the on line water analysis of the oil contained in the sample water passing through the Measuring content in dirty ballast water, according to MARPOL Regulations.

Motor Pump Assembly

The Motor and Sampling Pump assembly is the responsible mechanism for pumping the sample water from the sampling point of the ships Overboard Discharge Pipe to the Measuring Vessel or the PPM measurer for analysis, as well as for pumping fresh water during the different modes of operation of the ODME system sequence.

More Articles...

Page 1 of 3

«
Start
Prev
1
2
3
Next
End
»

ODME – EUROPE is trading through Darlas Electronic Applications SA or Darlas - Hellas.

DARLAS – HELLAS for 30+ years (from early 1980's till 2012) served as an Exclusive Sales and Service Agent for SERES France and from 2005 till 2007 for SEIL-SERES Korea, representing their Oil Discharge Monitoring Equipment, e.g.: ODME Ballast Monitors.

We currently work as an Independent - not Maker Authorized Sales & Service Station, for quite a few other ODME Makers, such as: Brannstrom - Sweden, Jowa AB, River Trace Engineering or RTE - England, Seil Seres - Korea, Seres - France and VAF - Netherlands just to mention a few of them.

In addition to above we also act as Independent and not Maker Authorized Brokers for all ODME Systems related with the second hand market by refurbishing and rebuilding all kind of old or used ODME's, thus supplying our products and services at very attractive prices and with full 30-Days money-back warranty under the term of: "No CURE No PAY".

Our specialization includes all sectors of business related with ODME Systems, Oil in Water Monitors and other related Marine Electronic Products. We can support you 100% with all your ODME needs included but not limited to Second Hand or Brand new Equipment Sales, Spare parts sales, Service Attendances and Technical support down to ODME component level.

ODME - Oil Discharge Monitoring Equipment - Germany

VISIT ODME GERMANY WEBSITE

ODME - Oil Discharge Monitoring Equipment - GREECE

VISIT ODME HELLAS WEBSITE

ODME - Oil Discharge Monitoring Equipment - FRANCE

VISIT ODME FRANCE WEBSITE

All above shown Registered®, Trademarks™ and Copyrights© of the above companies are recognised, and are linked to their respective companies websites. Darlas Electronic Applications SA, has served for more than 30 years as the exclusive Sales and Service Agent for Seres and Seil Seres ODME products. Darlas Electronic Applications SA is currently acting as an independent ODME Sales & Service Station specializing in ODME and other related marine products.